AUTOMATIC LIQUID FILLING MACHINE

IPEC Engineering provides automatic liquid filling machines with a strong base to ensure hassle-free operations. The bottles are not covered below the filling nozzles, to prevent spillage of liquid. IPEC automatic liquid filling machine is capable of fixing appropriate sizes of the syringe to fill the bottle of different capacities. Further, the conveyor can be adjusted to accommodate bottles of various sizes. Through a fibre star plate with a clutch, the bottle can be stopped and released.

IPEC AUTOMATIC HIGH-SPEED LINEAR BOTTLE WASHING MACHINE

Three-cycle rinsing allows flexibilities of various wash cycles such as fresh water, dematerialized water etc. as per the rinsing requirement of the bottle. All the pumps are made of stainless steel and all the water contact parts are made of stainless steel 316 on a heavy base of a stainless steel structure. The tunnel design is such that there is a separation between feeding zone and discharge zone of the cleaned containers. All the mechanical drives are separated and isolated from the washing zone.

IPEC automatic high-speed linear bottle washing machine is constructed with the approved materials, along with the careful choice of components, thereby taking into consideration all aspects of sanitation and consequence complying with the pharmaceutical G.M.P. requirements.The quality of rinsing is ensured through 3 sets of inner and 2 sets of outer nozzles accurately placed to direct the jet at the centre of the bottle.

IPEC AUTOMATIC HIGH-SPEED LINEAR BOTTLE WASHING MACHINE FEATURES

• Model PEW-N-LBW-150
• Output / Hour* 9000 bottles
• No. of Pocket Across 12
• Tank Capacity 80 Ltrs. S.S. 316
• Wash Cycle 3 Inner + 1 Outer + 1 Air
• Cycle Timing 3.5 second for each wash + 1.5 seconds for travelling
• Water / Air Consumptions 400 Ltrs. / Hr / Cycle / Pressure 2.5 Kg @ 20 CFM
• Machine Dimensions (In mm) 1450 x 2500 x 1550
• Case Dimensions (In mm) 1900 x 3000 x 2000
• Net Weight 1600 Kgs
• Gross Weight 2200 Kgs
• Change parts required
  1. (A) Neck Dia. Bottle holding pocket
  2. (B) Flat Container Size: Delivery chute

• Construction AISI S.S. 304 quality
• Three step pulley for speed adjustments
• Special self-aligned bearing to ensure trouble-free operations
• Suitable for different type of container
• Elegant Stainless Steel matt finish body
• Reduction gears to ensure jerk-free and noiseless operations

IPEC TURN TABLET SCRAMBLER & UN-SCRAMBLER TECHNICAL SPECIFICATIONS

IPEC AUTOMATIC ROTARY PISON FILLING CUM SEALING MACHINE

Automatic Rotary Piston Filling Cum Sealing Machine is versatile, self-supported on stainless steel leg with height adjustable adjustment system. The machine is precision built on sturdy welded steel frame completely enclosed in stainless steel sheet and doors are provided to facilitate the servicing of a machine, work on volumetric principle with rotary motion. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body. No container no filling & no sealing system arrangement is standard features of the machine.

IPEC AUTOMATIC ROTARY PISON FILLING CUM SEALING MACHINE FEATURES

• Model PEW-N-RFSC-4/4
• Output/Hour* 1500 to 6000
• Number of head/Syringe/cap 4/4
• Direction of Movement** Left to Right
• Fill Size*** 30 ml to 200 ml
• Height of Conveyor ** 910 mm to 960 mm Adjustable
• Machine Dimensions** 3050 (L) x 1400 (W) x 2200 (H)
• Case Dimensions 3250 (L) x 1600 (W) x 2400 (H)
• Net Weight 2400 Kgs
• Gross Weight 2950 Kgs

• No container, no cup arrangement
• SS elegantly matt finished body Single motor synchronizes conveyor, star wheel, & platform turret
• Adjustable height of conveyor belt, to align with other machines of the line
• Specially designed hopper is provided to increase the storage capacity of the bowl
• Low noise level, low power consumptions
• Self-lubricating UHMW- PE guide profile for low friction wear surface, smooth and noiseless conveying
• SS cladding or hard chrome plating of all exposed parts to ensure long life and resistance against corrosion
• A/C drive to synchronize, Conveyor, Starwheel and Platform turret & capping bowl
• Universal coupling for quick and easy setting of In-feed worm

IPEC AUTOMATIC MEASURING DOSING CUP PLACEMENT & PRESSING MACHINE TECHNICAL SPECIFICATIONS

IPEC AUTOMATIC SELF ADHESIVE VERTICAL LABELING MACHINE

The machine is used for full/partial wrap around labelling on different sized round containers. The Automatic Vertical Sticker Labeling Machine is user-friendly. It is capable of labelling up to 150 containers per minutes depending on products and label size. The automatic model is equipped with roller spacing device resulting in a simple operation with “No change parts required”.

IPEC AUTOMATIC SELF ADHESIVE VERTICAL LABELING MACHINE FEATURES

• Direction of Movement Left to Right
• Output/Hour* 3600 to 9000 Nos
• Electrical Specification**
• Conveyor Motor 0.50 HP, 415 Volts, 50 Hz
• Pressing device Motor 0.25 HP, 220 Volts, 50 Hz
• Sticker Roll Servo Motor 400 W
• Height of Conveyor** 860 mm to 910 mm
• Machine Dimensions** 1835 mm (L) x 600 mm (W) x 1450 mm (H)
• Case Dimensions 2050 mm (L) x 800 mm (W) x 1650 mm (H)
• Net Weight 350 Kgs
• Gross Weight 600 Kgs

• The structure is made of S.S. 304, 30 mm sq. pipe, 16 SWG with matt finish
• A/c frequency variable drive
• Belt-alignment system for long life & straight running of belt. Direct gear drive
• Length can be made as per customer requirement
• S.S. elegantly matt finishing
• Adjustable height of conveyor belt, to align with other machines of the line
• Self-alignment bearing for easy maintenance
• Rigid vibration free construction for trouble-free performance
• Direction of Movement Left to Right Speed** 7.5 Mtr./Min. up to 12 Feet Long 12 Mtr./Min. from 13 Feet to 24 feet long
• Power Characteristics** 0.25 HP/220 V/50 Hz up to 12 feet long 0.5 HP/220 V/50 Hz from 13 feet to 24 feet long
• Height of Conveyor** 860 mm to 910 mm
• Belt width** 9” or 12” as per requirement
• Belt Details** PVC, endless 2 ply sandwich , 2mm thickness
• Machine Dimensions** 9” width belt As per requirements (L) x 830 mm (W) x 910 mm (H) 12” width belt As per requirements (L) x 900 mm (W) x 910 mm (H)
• Case Dimensions** 9” width belt As per requirements (L) x 1050 mm (W) x 1150 mm (H) 12” width belt As per requirements (L) x 1100 mm (W) x 1150 mm (H)
• Net Weight Depend on Length
• Gross Weight Depend on Length

• Suitable for Round bottled medicine, food-stuff, cosmetic, etc.
• Packing into square box

IPEC CARTONING MACHINE LP CRM TECHNICAL SPECIFICATIONS